DIY Kits

Home Farm
Golda-1

DIY Kits

We provide a set of accessories for you. You can easily collect what you need for your home or your farm. All parts are made in Israel. What you assemble with your own hands from our set is of high quality and will work for many years.
If you have any questions or opinions, write your comment on the blog or

DIY Kits
Drip set DG25hb-MQ

  Drip irrigation system "Hobby greenhouse DG25hb-MQ" is designed to organize irrigation in hobby and backyard greenhouses up to 4 x 6 meters in size. Description The system is intended for a seasonal unheated greenhouse or for year-round operation in a greenhouse with heating up to 30 m². The system consists of a filter with a mesh or disc filter element (customer's choice), a manual valve, an 8 mm distribution tube, an 8 mm drip tube, and a set of mounting fittings. A source of technical or drinking water is used for irrigation. Water purification for irrigation is carried out by the filter included in the kit. Filter element material: mesh filter - polyester, disc filter - polypropylene. When the filter element becomes dirty, it does not need to be replaced. To clean it, rinse it under running water using a soft brush. As a working body for irrigation, a drip tube with a diameter of 8 mm with built-in emitters is used (the distance between the emitters is 30 cm or 20 cm), the water consumption from 1 emitter is 1.2 l / h. The system is operated by a manual control valve. The kit includes a ¾ ”female connector for connecting the system to the water supply, as well as a quick-release connector that allows you to connect the distribution pipe in one motion. This enables simple and quick assembly and disassembly of the system if necessary. To ensure the functioning of the system, it is required to provide a water pressure at the inlet to the system of at least 0.5 bar. At a pressure below the specified, irrigation uniformity is not ensured.   Installation scheme From the water supply source, the water flows through a PE tube with a diameter of 8 mm to 4 drip tubes laid along the beds with plants. The system is controlled by a tap provided. Installation of the system is very simple and takes no more than half an hour in time. When assembling the system, it is necessary to observe the correspondence of the direction of water flow to the arrow indicated on the filter.  Specification № Title Q-ty, pcs. 1 Connector ¾ F х 16 m 1 2 Valve ¾ F х 16 mm 1 3 Filter screen/disk 3/4''  1 4 Quick-release connector ¾ F х 8 mm 1 5 Tee 8 mm 3 6 Elbow 8 mm 2 7 Drip tube 8 mm diameter, 25 m 1 8 PE tube 8 mm, 5 m 1 All components are made in Israel.

Manufacturer
AgroSheriff Ltd.
Model
DG25hb-A

$27.30

Drip set DG25hb-Smart

DG25hb-Smart The automatic smart system of drip irrigation "Hobby greenhouse DG25hb-Smart" is designed to organize irrigation in hobby and backyard greenhouses up to 4 x 6 meters in size. The system is controlled via an application installed on a smartphone. Description The system is intended for a seasonal unheated greenhouse or for year-round operation in a greenhouse with heating up to 30 m². The system consists of a filter with a mesh or disc filter element (customer's choice), a manual valve, a smartphone operated irrigation controller, an 8 mm distribution tube, an 8 mm drip tube, and a set of mounting fittings. A source of technical or drinking water is used for irrigation. Water purification for irrigation is carried out by the filter included in the kit. Filter element material: mesh filter - polyester, disc filter - polypropylene. When the filter element becomes dirty, it does not need to be replaced. To clean it, rinse it under running water using a soft brush. As a working body for irrigation, a drip tube with a diameter of 8 mm with built-in emitters is used (the distance between the emitters is 30 cm or 20 cm), the water consumption from 1 emitter is 1.2 l / h. The system is controlled by the irrigation controller, which provides a cyclic irrigation mode according to a user-installed program, the duration of each irrigation is from 1 sec. The kit includes a ¾” female connector for connecting the system to the water supply. To ensure the functioning of the system, it is required to provide a water pressure at the inlet to the system of at least 0.9 bar.   Installation scheme From the water supply source, the water flows through a PE tube with a diameter of 8 mm to 4 drip tubes laid along the beds with plants. The system is controlled by the irrigation controller. Watering is carried out automatically according to your program. Installation of the system is very simple and takes no more than half an hour in time. When assembling the system, it is necessary to observe the correspondence of the direction of water flow to the arrows indicated on the filter and the solenoid valve.  Specification № Title Q-ty, pcs. 1 Connector ¾ F х 16 m 1 2 Valve ¾ F х 16 mm 1 3 Nippel ¾ М 2 4 Solenoid valve ¾ F with controller II-RI Smart 1 5 Filter screen/disk 3/4'' swivel 1 6 Adaptor 1/2М х 8 mm 1 7 Bushing 1/2F x 3/4M 1 8 Tee 8 mm 3 9 Elbow 8 mm 2 10 Drip tube 8 mm diameter, 25 m 1 11 PE tube 8 mm, 5 m 1 All components are made in Israel.

Manufacturer
AgroSheriff Ltd.
Model
DG25hb-A

$92.00

Set "Fog in the greenhouse"

 Set "Fog in the greenhouse" for the equipment to the greenhouse area of 90 m2 fogging sprinklers.
This kit allows you to maintain optimum microclimate in the greenhouse (temperature and humidity) for the cultivation of various crops, the cultivation of seedlings, nursery stock by green grafting.Options set.Filter disc 3/4, 55 md - 1 pc.
Controller G75-CW-half inches - 1 pc.
Ball valve 3/4 - 1 pc.
Adaptor 1 / 2RN x 16 - 1 pc.
Corner with union nut 3 / 4RV x 16 - 1 pc.
Adaptor 3 / 4RV x 1 / 2RN - 1 pc.
Plunger M - 50 pcs.
Valve antidrenazhny - 50 pcs.
Sprinkler TAV 6L / h - 50 pcs.  

Manufacturer
AgroSheriff Ltd.
Model
GG14

$188.00

Sprinkler irrigation "farm field FL1600sp»

As working organs for irrigation, sprinklers used low volume (sprinklers) water, spraying with a diameter of 6 meters. Sprinklers are mounted on stands 35cm tall. And attached to the water pipe or hose inside diameter of 25 mm. Sprinklers are installed in staggered tube placed at a distance of 4 meters from each other and at a distance of 4 meters along the pipe. Total system includes 100 sprinklers model 861. According to 12 and 13 units. on the line.Sprinkler irrigation watering system is designed to plot a total area of ​​1600 sq. meters. (0,8 acres). The system is intended for use in an intensive mode using industrial water source. To achieve low quality water purification, filtration system uses redundant technical poor water quality, comprising a coaxial strainer for purifying process water for agricultural purposes. The configuration permits the infiltration block-sequence two washing filters, without dismantling the filtering system and outputting the irrigation system on prevention.Irrigation system includes irrigation controller, all necessary fittings and fixtures, as well as a tool for system installation.Mounting diagram:irrigation system consists of a field unit, including the filters, valves, fittings, and a controller directly sprinklers themselves and the pipe (pipes not supplied).Water from the water source is supplied to a field unit (B) through a pipe or a flexible hose with a diameter of 25mm. (D).
At the field produced water filtration unit and its infeed portion of irrigated plastic or soft plastic pipes 25 mm diameter hose. (E).Tubes are mounted via fittings. As used fittings compression fittings for tubes 25mm. This compression corners (2), bends (1), end caps (3) and remkonnektory which are applied as necessary connecting pipes.Sprinklers (M) mounted under the scheme 4x4 m, in a staggered manner. The sprinkler is mounted on a plastic rack and connected to the pipe via a plunger. The holes are made for the plunger special tools supplied for piercing holes. For hard polyethylene pipes used liner diameter of 4 mm.
Field unit is mounted by means of threaded fittings with union nut. Connectors are provided with elastics for sealing and does not require application of rolling or sealants. The compounds are designed for multiple assembly / disassembly. The photo above - field block assembly and disassembled. The numbering corresponds to the numbering of parts in the specification.All fittings are sealed and do not require additional assembly when sealing materials (fum, tow, adhesives and the like)Specification: number Name Count 1 NLT25 tee 25 mm 6 2 NLE25 area 25 mm 2 3 NLP25 cap 25 mm 8 4 N1 pin 1 '' 3 5 NL251M adapter 25 * 1''M 1 6 NLT251M tee 25 * 1 '' * 25 1 7 STF1 tee 1''F * 1''F * 1''F 2 8 NLE1M corner 1''M 5 9 VMF34 tap 3/4 '' 2 10 861, 40 l / h, the sprinkler 100 eleven WEDG-35 Front 35 cm 100 12 4 / 7-060CC tube PE 30 cm with two fittings 100 14 pLUG plug 100 16 NL25 remkonnektor 4 17 Filter mesh SF1P120L 1 'with cap nuts 2 18 SBV1FT ball valve with union nut 1''F * 1''F 3 19 G75-C-1W controller 1 '' 1 20 hole puncher 1 Photo on the left - Photo on the right - a set of tools.the installation of a sprinkler on the PE pipe and flexible hose.a set of tools

Manufacturer
AgroSheriff Ltd.
Model
FL1600sp

$303.00

Urban growing facility, model Golda

Compact, full-featured growing system, complete with all the necessary equipment:
- built-in universal drip irrigation system that ensures uniform watering of all plants;
- a fine filter to ensure the operating conditions of the equipment and its long-term performance;
- a dosing pump for proportional addition of fertilizers, which supplies fertilizers to the root zone of plants in a constant mode;
- drainage system;
-automatic irrigation control operating in independently configurable mode, smart controller configurable via smartphone app. The unit is supplied unassembled and is intended for DIY assembly method.
Dimensions - length of 2 m (70 plants), width 0.6 m, height 1.5 m Specifications:
it is necessary to ensure the connection of the facility to the water supply with a minimum water pressure at the inlet to the system of 0.9 atm. No power supply required.
Dosing pump starts working automatically when water flows in, and stops when the flow stops. It is possible to stop the suction operation by switching on/off button.
Smart irrigation controller is enternal battery operated. Smartphone requirements - iOS7 or Android V4.3. All components have a 1 year warranty, subject to the operating rules described in the accompanying documentation.  

Manufacturer
AgroSheriff Ltd.
Model
1GOLDA1.0

$883.00

Urban growing facility, model Golda-mini

Compact, full-featured growing system, complete with all the necessary equipment:
- built-in universal drip irrigation system that ensures uniform watering of all plants;
- a fine filter to ensure the operating conditions of the equipment and its long-term performance;
- a dosing pump for proportional addition of fertilizers, which supplies fertilizers to the root zone of plants in a constant mode;
- drainage system;
-automatic irrigation control operating in independently configurable mode, smart controller configurable via smartphone app. The unit is supplied unassembled and is intended for DIY assembly method.
Dimensions - length of 1 m (35 plants), width 0.6 m, height 1.5 m. Specifications:
it is necessary to ensure the connection of the facility to the water supply with a minimum water pressure at the inlet to the system of 0.9 atm. No power supply required.
Dosing pump starts working automatically when water flows in, and stops when the flow stops. It is possible to stop the suction operation by switching on/off button.
Smart irrigation controller is enternal battery operated. Smartphone requirements - iOS7 or Android V4.3. All components have a 1 year warranty, subject to the operating rules described in the accompanying documentation.  

Manufacturer
AgroSheriff Ltd.
Model
2GOLDA2.0

$768.00

Displaying 1 to 6 (of 6 products)

Currencies
Authors