Sprinklers

Sprinklers irrigation
SPRINKLERS это одна из наших лучших категорий. В категории Sprinklers есть много типов Sprinklers.

Dynamic Sprayer 700

700 - Dynamic SprayerApplications:
Used for irrigation of trees with medium/small root zone.
Can be installed in upside down position for reduced wetting diameter. 
This is applicable for young plantation, enabling the grower to irrigate only the root zone and thus save water.For green house irrigation.For landscape and gardening Available flow rates: 
40-160  liters per hour (0.154-0.704 gpm).


 

Manufacturer
TAVLIT
Model
SPR700

$0.28

Foggers TAV-4

Fog in the greenhouse. Fogging sprayers. Foggers.Fogging sprinkler is designed for the greenhouse equipment to maintain the specified humidity, grow seedlings, grow seedlings by the method of green cuttings.The kit includes:4 TAV sprinklers, a splitter, an anti-drain valve, a plunger for mounting on a PE pipe.

Manufacturer
TAVLIT
Model
TAV-4L

$4.60

Micro Sprinklers 4191

4191 - MisterApplications: Used for germination, rooting and seedling. 
Also applicable for humidity controlled environment. 
Used for reducing high temperature and creating micro climate conditions in greenhouses, chicken coops and animal houses. 
 
Available flow rates: 
 20-180 lph (0.09-0.79 gpm). 

The use of NDV (non-drip device) is highly recommended in order to prevent dripping when opening and closing the water, keeping the pipes full and shortening the pulsing cycle. And save water.

Manufacturer
TAVLIT
Model
4191

$0.35

Minisprinkler 831


A single-jet mini-sprinkler 831 of a large diameter from 5.7 to 10.4 m. The irrigation sector is 360 °. The flow range is 35-240 l / h. Protected against penetration of insects.Mounted on a special rack.Working pressure for irrigation by single emitters is 1.0-2.0 atm., For overlapping irrigation - 2.0-2.5 atm.It is used for watering large trees (one emitter on a tree or between two trees), with an overlapping method of irrigation - in greenhouses and nurseries for growing flowers, vegetables, etc., for evaporative cooling systems and frost protection systems, in parks and landscape Design.It is necessary to pay attention to the fact that these sprinklers work well in the absence of wind. In strong winds, the humid area may not move reliably in the direction of the wind.

Manufacturer
TAVLIT
Model
SPR831

$0.45

Minisprinkler 861


Large wetting diameter minisprinkler 861 from 5,6 up to 9 m. Irrigation sector 360о .Flow rates range 35-240 l/h. Insect protected.Mounted on a stand or on a suspension.Recommended operating pressure 1,4-2,2 atm.Also works well in low pressure above 1.5 atm.Applications:Mature trees, one emitter per tree or between two trees;For overlapping irrigation at spacing up to 5x5 m in areas protected from wind;Greenhouses, seedling and germination;Landscape gardening;For cooling and frost protection systems;Used also for upside down irrigation where a lowe angle of stream is required.

Manufacturer
TAVLIT
Model
861

$1.16

Mist 1

Туман в теплице . Туманообразующие распылители. Фоггеры.
Туманообразующий спринклер предназначен для оборудования теплицы по поддержанию заданной влажности, выращиванию рассады, выращиванию саженцев методом зеленого черенкования.Туманообразующие спринклеры серии 4191 в сбореВ комплект входят: Туманообразователь миниспринклер 4191 - 1шт Предохранительный клапан (для перекрытия подачи воды при сбросе давления) Плунжер для запрессовки Плунжер резьбовой 3/8" Плунжер с резьбой 1/4''Вы должны выбрать нужный Вам тип плунжера при заказе!

Спринклер может устанавливаться непосредственно на трубу, или же подвешиваться на подвеске.

Предлагаются подвески длиной 30 и 60 см.Вы должны выбрать нужную Вам длину подвески при заказе!Спринклер может устанавливаться непосредственно на трубу, или же подвешиваться на подвеске.

Предлагаются подвески длиной 30 и 60 см.Вы должны выбрать нужную Вам длину подвески при заказе! Дополнительное оборудование.
Фильтрация воды для таких ситем - ОБЯЗАТЕЛЬНА!
Поэтому, на входе, обязательно нужно поставить фильтр.Фильтр нужно выбирать исходя из объема воды, потребляемого вашей системой в единицу времени.

Для оптимальной работы системы туманообразования рекомендуется использовать автоматический контроллер GEVA 75W

Контроллер GEVA 75W имеет подходящие опции программирования для использования в системах туманообразования.
Контроллер работает от Батареи "Крона". Одной батареи хватает на сезон полива.

Manufacturer
AgroSheriff Ltd.
Model
4191

$2.20

Mist TAV-1


Fog in the greenhouse. Fogging sprayers. Foggers TAV-1.Fogging sprinkler is designed for the greenhouse equipment to maintain the specified humidity, grow seedlings, grow seedlings by the method of green cuttings.
The kit includes: TAV sprinkler, anti-drain valve, plunger for installation on PE pipe.

Manufacturer
TAVLIT
Model
TAV1-1

$2.50

Mist TAV-4T with tube 30 cm

Fog in the greenhouse. Fogging sprayers. Foggers.Fogging sprinkler is designed for the greenhouse equipment to maintain the specified humidity, grow seedlings, grow seedlings by the method of green cuttings.The kit includes: 4 TAV sprinklers, splitter, anti-drain valve, 30 or 60 cm suspension, plunger for PE pipe mounting.

Manufacturer
TAVLIT
Model
TAV-4TOP

$5.20

Mist TAV1-TOP


Fog in the greenhouse. Fogging sprayers. Foggers TAV1-TOP.Fogging sprinkler is designed for the greenhouse equipment to maintain the specified humidity, grow seedlings, grow seedlings by the method of green cuttings.The kit includes: TAV sprinkler, anti-drain valve, suspension, plunger for installation on PE pipe. The suspension is used to stabilize the sprinkler position at temperature deformations of the water supply pipe. Fogger will always hang in the direction of the earth strictly vertically.

Manufacturer
TAVLIT
Model
TAV1-TOP

$3.10

Sprinkler irrigation "farm field FL1600sp»

As working organs for irrigation, sprinklers used low volume (sprinklers) water, spraying with a diameter of 6 meters. Sprinklers are mounted on stands 35cm tall. And attached to the water pipe or hose inside diameter of 25 mm. Sprinklers are installed in staggered tube placed at a distance of 4 meters from each other and at a distance of 4 meters along the pipe. Total system includes 100 sprinklers model 861. According to 12 and 13 units. on the line.Sprinkler irrigation watering system is designed to plot a total area of ​​1600 sq. meters. (0,8 acres). The system is intended for use in an intensive mode using industrial water source. To achieve low quality water purification, filtration system uses redundant technical poor water quality, comprising a coaxial strainer for purifying process water for agricultural purposes. The configuration permits the infiltration block-sequence two washing filters, without dismantling the filtering system and outputting the irrigation system on prevention.Irrigation system includes irrigation controller, all necessary fittings and fixtures, as well as a tool for system installation.Mounting diagram:irrigation system consists of a field unit, including the filters, valves, fittings, and a controller directly sprinklers themselves and the pipe (pipes not supplied).Water from the water source is supplied to a field unit (B) through a pipe or a flexible hose with a diameter of 25mm. (D).
At the field produced water filtration unit and its infeed portion of irrigated plastic or soft plastic pipes 25 mm diameter hose. (E).Tubes are mounted via fittings. As used fittings compression fittings for tubes 25mm. This compression corners (2), bends (1), end caps (3) and remkonnektory which are applied as necessary connecting pipes.Sprinklers (M) mounted under the scheme 4x4 m, in a staggered manner. The sprinkler is mounted on a plastic rack and connected to the pipe via a plunger. The holes are made for the plunger special tools supplied for piercing holes. For hard polyethylene pipes used liner diameter of 4 mm.
Field unit is mounted by means of threaded fittings with union nut. Connectors are provided with elastics for sealing and does not require application of rolling or sealants. The compounds are designed for multiple assembly / disassembly. The photo above - field block assembly and disassembled. The numbering corresponds to the numbering of parts in the specification.All fittings are sealed and do not require additional assembly when sealing materials (fum, tow, adhesives and the like)Specification: number Name Count 1 NLT25 tee 25 mm 6 2 NLE25 area 25 mm 2 3 NLP25 cap 25 mm 8 4 N1 pin 1 '' 3 5 NL251M adapter 25 * 1''M 1 6 NLT251M tee 25 * 1 '' * 25 1 7 STF1 tee 1''F * 1''F * 1''F 2 8 NLE1M corner 1''M 5 9 VMF34 tap 3/4 '' 2 10 861, 40 l / h, the sprinkler 100 eleven WEDG-35 Front 35 cm 100 12 4 / 7-060CC tube PE 30 cm with two fittings 100 14 pLUG plug 100 16 NL25 remkonnektor 4 17 Filter mesh SF1P120L 1 'with cap nuts 2 18 SBV1FT ball valve with union nut 1''F * 1''F 3 19 G75-C-1W controller 1 '' 1 20 hole puncher 1 Photo on the left - Photo on the right - a set of tools.the installation of a sprinkler on the PE pipe and flexible hose.a set of tools

Manufacturer
AgroSheriff Ltd.
Model
FL1600sp

$303.00

Displaying 1 to 10 (of 10 products)

Currencies
Authors