Fertigator for the farmer

The most common fertigation systems are assembled on the basis of proportional metering pumps MixRite 2.5. These pumps are available in several modifications and allow you to collect fertigation units of various capacities and configurations.

MixRite 2.5 pumps are designed for the constant dosage of fertilizers or any chemical or biological preparations into flowing water with a fixed and adjustable dosage from 0.2% to 10%. The pumps are produced to work with various chemicals. There are models designed to work with particularly aggressive substances, such as acids, chlorine-containing solutions, etc. The device is compact, reliable, durable, and designed for both indoor and outdoor use.

Metering pump models

MixRite2.5 metering pumps are the most popular and versatile model, available in several modifications. The variety of pump models is due to their wide application not only in agriculture but also in many other industries.

When selecting the necessary models, you need to be guided by the specific requirements of operating conditions. In some cases, it is sufficient to use a pump with a fixed dosage rate, and in some, for example, in fertigation devices (feeding fertilizers with irrigation water), if the fertigation unit contains several pumps, it is advisable to use pumps with an adjustable dosage, and for the dosage of acids in hydroponic systems, use a special acid pump for dosing acid and maintaining the set value of the acidity of the nutrient solution (Ph).

Application examples. Fertigation.

Fertigation systems are used to fertilize plants outdoors and in greenhouses. The configuration of the fertigation unit can be different and include from one to several dosing pumps.

MixRait pumps are also widely used in livestock and poultry farming for the precise dosage of minerals, vitamins, probiotics, and feed additives that are fed with drinking water for raising pets and poultry.

Fertigation blocks. Complete assemblies.

Our company supplies consumers with MixRite pumps of all types, as well as various configurations of fertigation kits, from the simplest to the most complex ones, including those equipped with irrigation water control systems and automation systems. Examples of kits in the photo below.

Application.

The assemblies shown above can be applied:

• For adding fertilizers, basic and microelements to irrigation water in the open field, and in greenhouses.
• For dosing pesticides in plant spray systems.
• To add micronutrient fertilizers and biostimulants when watering and spraying plants in greenhouses through sprinkler fogging systems.
• Dosed addition of minerals and vitamins to drinking water in animal husbandry and in the field of animal husbandry.
• Adding detergents to systems where it is required, such as car washes, food processing, etc.

Acquisition

If you need such fertigation units in your farm, you more than welcome to contact us or one of our representatives worldwide.