application of fertigation systems:
The population of the Earth is constantly increasing. This circumstance requires a constant increase in food production. Unfortunately, this is impossible without the effective use of fertilizers. According to marketminder.com, the consumption of fertilizers in the world has increased by almost 10 times over the last half-century. Unfortunately, the cost of fertilizers has increased proportionally. Nevertheless, the dynamics of growth in the use of fertilizers in the world shows that in developed agricultural countries, despite the growth in agricultural production, the amount of fertilizers consumed does not increase, and in some cases even decreases.
What is the reason for this? First of all, with the efficiency of the use of fertilizers and technologies for their application. During this time, effective technologies have been developed, using which fertilizers are delivered to the plants in a targeted manner, with an accurate dosage and minimal losses. Effective methods of fertigation (application of fertilizers with irrigation water) and appropriate equipment for this have been developed.
- Field crops.
- Vegetable growing.
- Greenhouses.
- Vineyards.
- Fruit and citrus orchards.
- Nurseries.
- Cotton, corn, fodder, and industrial crops.
- Fertilizing lawns, gardens, parks, golf courses.
- Summer houses, dachas, and vegetable gardens.
|
FERTILIZER APPLICATION SYSTEMS
Traditional and already widespread fertigation systems are based on the use of various devices for mixing fertilizer stock solution with irrigation water.
The easiest and most inexpensive way is to use a venturi injector. But the mixing ratio of fertilizers with water is very difficult to maintain within the specified limits since the mixing ratio is highly dependent on the flow rate and water pressure.
Many traditional fertigation systems use injectors for mixing, but such systems have to be equipped with complex and expensive computer control systems, which leads to their high cost and cannot be used on small and medium-sized farms. Such systems also require qualified technical personnel for their maintenance and repair.
The use of a simple and Injector for fertilizing in the open field, that is, in the field, is of course acceptable, but this method works as a salvo feeding of plants and does not allow accurate dosage and adjustment of the irrigation composition. water A special direction in the development of agriculture is hydroponics. Hydroponics is being used more and more widely, and not only in greenhouses but even in open ground, especially in those places where the soil is unsuitable for traditional plant cultivation.
What to do? What method and what equipment to choose for a reliable, accurate, and economical guaranteed supply of plants with fertilizers? Please, familiarize yourself with the equipment we produce. This is a fairly simple, high-tech and low-cost equipment. It is easily assembled on its own, operates reliably, and is easy to maintain and repair. Suitable for large and very large open field irrigation areas, for small areas, for greenhouses, for hydroponics systems, including low-volume precision hydroponics and aeroponics systems.
|
FERTIGATION equipment from AGROSHERIFF Ltd. for your FARM OR GREENHOUSE.
If you use irrigation on your farm field, in your backyard or summer cottage, or in a greenhouse, then the use of fertigation, that is, the supply of mineral nutrients along with irrigation water is very desirable, and if you grow plants on poor soils or in hydroponics, then this is simply necessary ...
The need for fertigation arose because traditional fertilization methods are only partially effective and have many disadvantages. Conventional fertilizers are very concentrated and can be too harsh for the delicate plant roots, causing chemical burns to the plant root system. On the other hand, if the fertilizer granules are in the soil at a considerable distance from the roots, the fertilizer effect may be too weak and thus almost useless. In addition, in the open field, fertilizers are washed out by rains, and, instead of fertilizing the plants, they saline the soil and groundwater, polluting the environment.
One of the main disadvantages of traditional methods of plant fertilization is that fertilizers are distributed unevenly and plant nutrition is unstable, and the concentration of nutrients is constantly decreasing.
When using fertigation, fertilizer is supplied to the plants directly from the irrigation water, constantly, stably, in a balanced manner. Plants feel as comfortable as possible and give maximum yield. You can set and adjust the diet of your plants without much difficulty and exactly as your plants need it. One of the main advantages is that we don't waste fertilizers. They are almost completely assimilated by plants, and this is very important for two reasons: the products are environmentally friendly, without excess nitrates and we significantly save on fertilizers, respectively, reduce costs and increase the profitability of production.
AGROSHERIFF produces a large number of modifications of fertigation systems of various capacities, from 20 liters to 125 cubic meters of water per hour. Our fertigation units - mortar units, are used even for very small hydroponic installations, with an area of several square meters for the amateur cultivation of various vegetable and exotic plants, for landscaping systems for office and residential premises, for example for vertical landscaping, as well as for greenhouses of any size and on fields of hundreds of hectares.
ATTENTION! An important feature of our work: We are attentive to the requests of our customers and offer ready-made, standard solutions for you, or specially design and manufacture for you fertigation units that meet your request and requirements!
|