Fertigation Equipment - Efficient Technology

application of fertigation systems:

The population of the Earth is constantly increasing. This circumstance requires a constant increase in food production. Unfortunately, this is impossible without the effective use of fertilizers. According to marketminder.com, the consumption of fertilizers in the world has increased by almost 10 times over the last half-century. Unfortunately, the cost of fertilizers has increased proportionally. Nevertheless, the dynamics of growth in the use of fertilizers in the world shows that in developed agricultural countries, despite the growth in agricultural production, the amount of fertilizers consumed does not increase, and in some cases even decreases.
Fertilizers
What is the reason for this? First of all, with the efficiency of the use of fertilizers and technologies for their application. During this time, effective technologies have been developed, using which fertilizers are delivered to the plants in a targeted manner, with an accurate dosage and minimal losses. Effective methods of fertigation (application of fertilizers with irrigation water) and appropriate equipment for this have been developed.

  • Field crops.
  • Vegetable growing.
  • Greenhouses.
  • Vineyards.
  • Fruit and citrus orchards.
  • Nurseries.
  • Cotton, corn, fodder, and industrial crops.
  • Fertilizing lawns, gardens, parks, golf courses.
  • Summer houses, dachas, and vegetable gardens.

Fertilizing equipment and systems from AGROSHERIFF Ltd.

This method of fertilization is currently used everywhere: in greenhouses Automatic system for supplying fertilizer to irrigation water, equipped with electric or hydraulic controlled taps Automatic system for irrigation and supply of fertilizer to irrigation water, with automatic control and correction of pH / EC (acidity and conductivity) ...

  • Automatic irrigation and fertilization system for open ground and greenhouses
  • Fertilizer delivery while watering.
  • The ability to supply fertilizers to the entire area, or to a separate line.
  • The use of several types of fertilizers at the same time (up to 8 components).
  • The concentration and amount of fertilizers can be adjusted for each irrigation line separately.

FERTILIZER APPLICATION SYSTEMS

Инжекторная системаФертигатФертигатTraditional and already widespread fertigation systems are based on the use of various devices for mixing fertilizer stock solution with irrigation water.

The easiest and most inexpensive way is to use a venturi injector. But the mixing ratio of fertilizers with water is very difficult to maintain within the specified limits since the mixing ratio is highly dependent on the flow rate and water pressure.

Many traditional fertigation systems use injectors for mixing, but such systems have to be equipped with complex and expensive computer control systems, which leads to their high cost and cannot be used on small and medium-sized farms. Such systems also require qualified technical personnel for their maintenance and repair.

The use of a simple and Injector for fertilizing in the open field, that is, in the field, is of course acceptable, but this method works as a salvo feeding of plants and does not allow accurate dosage and adjustment of the irrigation composition. water A special direction in the development of agriculture is hydroponics. Hydroponics is being used more and more widely, and not only in greenhouses but even in open ground, especially in those places where the soil is unsuitable for traditional plant cultivation.

What to do? What method and what equipment to choose for a reliable, accurate, and economical guaranteed supply of plants with fertilizers? Please, familiarize yourself with the equipment we produce. This is a fairly simple, high-tech and low-cost equipment. It is easily assembled on its own, operates reliably, and is easy to maintain and repair. Suitable for large and very large open field irrigation areas, for small areas, for greenhouses, for hydroponics systems, including low-volume precision hydroponics and aeroponics systems.

FERTIGATION equipment from AGROSHERIFF Ltd. for your FARM OR GREENHOUSE.

FertyMix SuperIf you use irrigation on your farm field, in your backyard or summer cottage, or in a greenhouse, then the use of fertigation, that is, the supply of mineral nutrients along with irrigation water is very desirable, and if you grow plants on poor soils or in hydroponics, then this is simply necessary ...

The need for fertigation arose because traditional fertilization methods are only partially effective and have many disadvantages. Conventional fertilizers are very concentrated and can be too harsh for the delicate plant roots, causing chemical burns to the plant root system. On the other hand, if the fertilizer granules are in the soil at a considerable distance from the roots, the fertilizer effect may be too weak and thus almost useless. In addition, in the open field, fertilizers are washed out by rains, and, instead of fertilizing the plants, they saline the soil and groundwater, polluting the environment.


One of the main disadvantages of traditional methods of plant fertilization is that fertilizers are distributed unevenly and plant nutrition is unstable, and the concentration of nutrients is constantly decreasing.


When using fertigation, fertilizer is supplied to the plants directly from the irrigation water, constantly, stably, in a balanced manner. Plants feel as comfortable as possible and give maximum yield. You can set and adjust the diet of your plants without much difficulty and exactly as your plants need it. One of the main advantages is that we don't waste fertilizers. They are almost completely assimilated by plants, and this is very important for two reasons: the products are environmentally friendly, without excess nitrates and we significantly save on fertilizers, respectively, reduce costs and increase the profitability of production.

AGROSHERIFF produces a large number of modifications of fertigation systems of various capacities, from 20 liters to 125 cubic meters of water per hour. Our fertigation units - mortar units, are used even for very small hydroponic installations, with an area of several square meters for the amateur cultivation of various vegetable and exotic plants, for landscaping systems for office and residential premises, for example for vertical landscaping, as well as for greenhouses of any size and on fields of hundreds of hectares.

ATTENTION! An important feature of our work: We are attentive to the requests of our customers and offer ready-made, standard solutions for you, or specially design and manufacture for you fertigation units that meet your request and requirements!

SMALL FERTIGATION MINI BLOCKS

MiniFert3-1For use in small greenhouses, small low volume hydroponic plants and small areas, we recommend the MiniFert-3-1 low volume fertigation system.

It is relatively inexpensive, reliable, accurate and stable. Supplied complete. Uses up to 3 components of liquid fertilizers.

The system is easy is mounted and does not require complex installation and maintenance. In the photo, mounted equipment for fertigation of small areas.

Water performance: From 20 to 1000 liters per hour.
Minimum pressure: 1.5 bar
Maximum pressure: 6 bar
Dosage: 0.2% for each of the 3 fertilizer components.
Supply: Set. Air or express mail.
Construction materials: Chemically resistant plastic, stainless steel, Viton sealant.

 

 

 

 

 

 

  • No external power supply needed.
  • The hydraulic drive uses the water pressure in the irrigation system.
  • The device is resistant to almost all known chemicals used in agriculture and horticulture.
  • Used metering pumps with a fixed percentage of dosage.

 

Fertigation unit FertyNorm-2P-PP

FertyNorm-2P-PP

Fertigation Block FertyNorm-2P-PP intended for proportional-dosed addition of fertilizers to irrigation water in small and medium-sized greenhouses and in open ground areas.

The fertigation unit is supplied complete with piping, which allows you to quickly and easily connect it to a water source and irrigation system using threaded connections.

The taps included in the piping kit are designed to switch the fertigation unit operating modes: irrigation with clean water and irrigation with the addition of fertilizers.

The pumps and all piping parts are made of UVA-protected plastic, which allows the equipment to be installed even outdoors without additional shelter from the sun. The advantage of this fertigation unit is the ability to separately add two types of fertilizer or fertilizer + acid.

Specifications:

Name Parameter
Maximum performance: (maximum water flow) 5.0 m³ / h
Minimum capacity: (minimum water consumption) 60 liters/hour
Minimum working pressure 1.5 atm
Maximum working pressure 6,0 atm
Working temperature from + 5ºС to +60ºС

 

 

 

 

Attention! The system can only be operated at positive temperatures. A drop in temperature below 0 ° C can lead to defrosting and system failure.

 

FertyNorm-3S-PVC-2F

FertyNorm-3S-PVC-2FFertigation unit FertyNorm-3S-PVC-2F designed for proportionally-Dosed addition of fertilizers to irrigation water in small and medium-sized greenhouses for low-volume hydroponics. The unit is equipped with mesh filters at the inlet and disc filters at the outlet of the device, which allows preliminary and final fine filtration of the incoming water and the outgoing nutrient solution.

Specifications:

Name Parameters
Maximum performance: (maximum water flow) 2.5 m³ / h
Minimum capacity: (minimum water consumption) 30 liters/hour
Minimum working pressure 1,5 atm
Maximum working pressure 6,0 atm
Working temperature from + 5ºС to + 60ºС

 

 

 

 

Attention! The system can only be operated at positive temperatures. A drop in temperature below 0 ° C can lead to defrosting and system failure.

FertyBigWORK-4S-PVC-3F
FertyBigWork-4S-PVC-3F

Fertigation unit FertyBigWork-4S-PVC-3F is designed for proportional-dosed addition of fertilizers and acid to irrigation water on large areas with irrigation water consumption up to 75 cubic meters per hour. It is used on large vegetable farms, for irrigation and fertilization of gardens and vineyards.

Specifications:

Name Parameters
Maximum performance: (maximum water flow) 75 m³ / h
Minimum capacity: (minimum water consumption) 8 m³ / hour
Minimum working pressure 1,5 atm 
Maximum working pressure 6,0 atm
Working temperature from + 5ºС to + 60ºС

 

 

 

 

Attention! The system can only be operated at positive temperatures. A drop in temperature below 0 ° C can lead to defrosting and system failure.

Examples of practical solutions:

Ferty Strawberry Ukraine

Ferty Strawberry Gelenjik

Ferty Яблочный сад

Ferty Greenhouse Ukraine

Ferty vegetables Dominikana

Ferty Uzbekistan Apple

Ferty Krasnodar

Ferty Kazakgstan

Туймазы Башкирия

Ferty Kazakgstan

Ferty Grape Ukraine

Ferty Strawberry greenhouse Russia

 

Reviews
Greenhouse Teden-500
Greenhouse Teden-500
$12,603.24

Здорово мне нравится!Я хочу такую строить. Просчитаю как по
Manufacturers