Mini Sprinkler Series 4191

Продукт может незначительно отличаться от изображенного на картинке.

Series Minisprinkler 4191

The perfect solution for fogging systems.

Minisprinkler 4191

Mini sprinkler 4191 is designed to maintain a constant humidity, high-temperature reduction in hot climates due to the evaporation plant, and for irrigation in special conditions.

Mini sprinkler 4191 provides fogging with a very small droplet size - about 50 to 250 microns at a pressure of 3.0 atm.

The unique design eliminates the formation of larger droplets and dripping on plants when placed on top of the sprinkler.

Mini sprinkler 4191 operates over a wide range of water pressure. Raising the pressure and use sprinklers with smaller water consumption can obtain minimum droplet size.

The minimum pressure at which the safety valve is closed is approximately 2.5 atm. Minisprinklery 4191 can be installed on racks and suspended in the case of the upper wiring water.

We recommend for foggers mounting scheme settings, as in the photo below.

Specification:

Material

Polyacetal

Colour

The black

water consumption

12,20,35,50,70,90,160,180 liters per hour

Operating pressure

1.0-4.0 atm.

The diameter of the irrigation

2.0-4.0 m

The opening angle of the water torch

Circular, approximately 310 °

The direction of spraying

horizontal

The droplet size

Approximately 50-150 microns under a pressure of 3.0 atm.

application

Greenhouses, nurseries, plant for
artificial fogging.

fogging

Application:

Key Applications foggers mini sprinklers:

  • humidity control
  • Cooling
  • irrigation of greenhouses
  • seedling production
  • seed germination after planting
  • Rooting and green cuttings.

 

Packaging and assembly.

The kit consists of the following components:

4191 equipment

  1. 4191 assemblyMini sprinkler 4191
  2. Antidrenazhny valve (water supply pressure when resetting overlap)
  3. Plunger
  4. connector
  5. Threaded plug threaded M-11
  6. The tube connection
  7. A weighting agent to provide a stable position of the sprinkler during operation.

The set is delivered to consumers in the collection.
There are three variants of assembly -. With a tube length of 30, 60 and 100 cm tube length must be specified in the order.

In the photo :
Set for the fogging installation assembly. Tube length 60 cm.

 

The maximum distance (radius irrigation)
Series 4190 and 4191 at a pressure of 2.5 atm. For continuous coating irrigated area.

 

Mini sprinkler 4191

Maximum flame size (radius).

The recommended maximum distance between sprinklers. Moisturize the area.

Minisprinkler 4191-020,

1.1 m

150 cm. 2.25 sq.m.
Minisprinkler 4191-035 1.25 m 160 cm. 2.56 sq.m.

Minisprinkler 4191-050

1.40 m

170 cm. 2.90 sq.m.

Minisprinkler 4191-070

1.50 m

175 cm. 3.10 sq.m.
Minisprinkler 4191-070 1.60 m 180 cm. 3.25 sq.m.

Addition:

Mini sprinkler

Pressure

Water flow at the operating pressure

Height

Position

irrigated diameter

The amount of water-based on the precipitation.
Millimeters per hour.

Mini sprinkler 4191-020

2.0 atm.

20.0 liters per hour

200 cm.

top suspension

2.2 m

4.1 mm / h

Mini sprinkler 4191-020

2.8 atm.

23.7 liters per hour

200 cm.

top suspension

2.4 m

5.2 mm / h

Mini sprinkler 4191-035

2.0 atm.

35.0 liters per hour

200 cm.

top suspension

2.25 m

6.8 mm / h

Mini sprinkler 4191-035

2.8 atm.

41.4 liters per hour

100 cm.

Installing the bottom

2.45 m

10.0 mm / hour

Mini sprinkler 4191-050

2.0 atm.

50.0 liters per hour

200 cm.

top suspension

2.8 m

8.8 mm / h

Mini sprinkler 4191-070

2.0 atm.

70.0 liters per hour

200 cm.

top suspension

3.0 m

7.7 mm / h

Mini sprinkler 4191-070

2.8 atm.

82.8 liters per hour

100 cm.

Installing the bottom

3.3 m

10.3 mm / hour

Mini sprinkler 4191-070

2.8 atm.

83.0 liters per hour

200 cm.

top suspension

3.5 m

9.5 mm / h

Mini sprinkler 4191-090

2.0 atm.

90.0 liters per hour

200 cm.

top suspension

3.3 m

11.5 mm / hour

 

Putting water in a greenhouse.

EXAMPLE fogging mini sprinklers use in a greenhouse for growing plants.

Minisprinklery arranged in the calculation scheme for full utilization of the entire area of ​​the greenhouse and uniform wetting.

For the automation, use the controller with a minimum running time of 1 second. This controller allows to control the mode of irrigation and fogging widely.

 

The combination of drip and sprinkler irrigation is an ideal technological solution for the greenhouse. Irrigation and microclimate.

4191 assembly

Reviews
Greenhouse Teden-500
Greenhouse Teden-500
$12,603.24

Здорово мне нравится!Я хочу такую строить. Просчитаю как по
Manufacturers