Automation in agriculture
Automation unit with 3 solenoid valves (diameter 25 mm) and 3 controllers.Allows to organize 3 irrigation zones.Minimum irrigation time 1 sec.
Automation unit with 4 solenoid valves (diameter 25 mm) and 1 inch main ball valve.Allows to organize 4 irrigation zones.To control the solenoid valves need to use the controller.
Controller GALCON GQ8100-2-4-6-8.
Operation of 4 to 12 valves plus a master valve (or pump to increase the pressure).
Operation of 2 valves simultaneously plus a master valve.
Separate irrigation schedule programmable for each valve.
Use of 24V AC electric valves. Operation by means of a 24V AC - 230V AC transformer (included). 9V battery program backup.
Valve assignment to a lockout sensor.
Programmable weekly/cyclical irrigation schedules.
Up to 4 irrigation activations per day per valve in programmable weekly schedule mode.
Irrigation duration: 1 minute to 12 hours with frequency once a day to once every thirty days or 1 second to 12 hours with frequency once a minute to once every thirty days (model S).
Automatic irrigation controller G75-W,a minimum run time of 1 second.
Lets organize automatic water supply for irrigation on schedule.
cycle of seven days, at the end of the cycle the controller starts a new cycle of watering.
Ability to define "watering windows" - the time frame during which watering will not be performed.
Video manual.
LDPE Control Tube 6/4
The control tube is used in hydraulics and pneumatics to transmit signals between different nodes in automation