Fertigation unit FertyNorm Compact-2S-PVC-CT
Fertigation unit FertyNorm Compact-2S-PVC-CT for proportional dosing addition of fertilizers and acid in the irrigation water in greenhouses of small and medium-sized, small areas of open field.
FertiNorm CD-2S-PVC-CT allows to provide the minimum necessary requirements for growing plants hydroponically.
||50 - 2500 l/h
|Max water pressure
|Optimal working pressure
2 - 4.5 bar
|Permissible water temperature
+2ºС - +30ºС
|Permissible air temperature
|| +5ºС - +50ºС
Attention! System operation is allowed only at positive temperatures. The drop in temperature below 0 ° C may cause defrosting and system breakdown.
Fertigation unit comes as kit for self-assembly, allowing you to easily and quickly connect it to the water source and to the irrigation system using threaded connections.
By using the valves, included in the kit, it is possible to switch fertigation modes: watering with pure water and watering with the addition of fertilizers.
All parts are made of PP with protection against UVA, which allows installation even in the open air without shelter from the sun.
The advantage of this unit is the ability of precise additive injection of two kinds of fertilizer or one fertilizer and acid - separatly.
In order to prevent clogging, reduce wear of mechanical parts and extend the life of the system - the filtration unit is installed at the input of fertigation unit.
At the output of block fertigation also installed a filtration unit for final fine water filtering with fertilizer.
ATTENTION! It is necessary to monitor the availability of fertilizer solution into the container with the mother liquor, as operation of the dosing pump on "idle" can lead to increased wear or damage of the dosing pump.
The kit includes: