FN-Compact-1-1.0 Fertigation Unit
Fertigation unit FM-Compact - 1- 1.0 is designed for proportional-dosed addition of fertilizers into irrigation water in automatiс mode. It fits perfectly for small and medium-sized greenhouses, for small areas of open ground, for backyards and lawns and also provides minimum requirements for growing plants on hydroponics.
|Maximum capacity: (maximum water flow)
||1.0 m³ / h
|Minimal productivity: (minimum water flow)
||20 liters / hour
|Minimum working pressure
|Maximum working pressure
||from + 5ºС to + 60ºС
Attention! Operation of the system is allowed only at positive temperatures. A drop in temperature below 0 ° C can lead to defrosting and system failure.
The fertigation unit is supplied in the kit, which allows it to be easily and quickly connected to the water source and irrigation system with threaded connections.
Switching the operating modes of the fertigation unit (irrigation with pure water and irrigation with the addition of fertilizers) is carried out by simply pressing a button on the body of the dosing pump.
All parts of the kit are made of polypropylene with UVA protection, which allows you to install the equipment even in the open air without additional shelter from the sun.
Recommended: install a filter in front of the fertigation unit to prevent clogging of the pump, reduce wear of mechanical parts and prolong the life of the system.
ATTENTION! It is necessary to monitor the presence of fertilizer solution in containers with mother liquor, as the operation of the dosing pump "idling" can lead to increased wear or failure of the dosing pump.
|MixRite 1.0 for fertilizers
|Irrigation CONTROLLER GEVA-75W
|Disc Filter, Valve and Fittings
The fertigation unit is ready for installation in a greenhouse or on growing beds.
Company Agrosheriff Ltd. constantly improving its products in order to improve their technical characteristics, operability and functionality, in this connection the company reserves the right to insignificantly change the configuration and details of the strapping without degrading the product's parameters.